In the manufacture of tents Was only the latest high-tech and high-quality materials. Thanks to their use of tents are:
•    Increased strength
•    Resistant to UV light
•    High water resistance.
We offer you a brief description of the materials used in the construction of tents.
The main technological concepts and characteristics:
•    185T, 250t-(Thread Count)-this is the total number of threads per square inch in the longitudinal and transverse directions. The greater the number of threads, the denser the tissue.
•    30 d, 150 d-Den (Denie)-thickness of threads participating in the mix.
•    Polyester, nylon, polyethylene is the chemical composition of the yarns.
•    RIP Stop-look weave fabrics, where after a certain number of interwoven strands thicker thread. In this case, the fabric is more durable in the gap with a slight increase in weight.
•    PU, SI-type stitches (polyurethane, silicone).
3000-index of waterproof fabrics in millimeters of water (up to 1500 mm-fabric is not waterproof, it will start to flow in rain; 2500 mm and more-the fabric cover will withstand almost any weather conditions).

Water impermeability (waterproofness) is a very important indicator, measured in mm water column. Camping tents with external awning fabric has a score of not less than 2500 mm, will resist almost any rain. It is important that the characteristics of water impermeability value tents were true. The water resistance of 2500 mm is achieved using a double polyurethane coating impregnation, 4000 mm-with a triple and so on. Polyurethane (PU) tents impregnation is applied on the inside of the tent, on special technology to keep it from crumbling.

The question arises: why do you need such a high water resistance? It’s simple: drop of water with a specific weight of falling from a great height, has kinetic energy (power) and when the awning can simply “kick” material with low velocity. The second reason is the material gradually wears out and over time starts to leak. Accordingly, the more water resistant hood, the longer will serve your camping tents.
Silicone impregnation: is usually applied to the upper or lower layer of material (and can be applied on top of the impregnation PU). The impregnation is very solid and functional: silicone keeps moisture build up in the fibers. Click For More About: Tent city

The silicone coating considerably increases the strength of the fabric and the elasticity of the material. When you use the weave Rip Stop canopy will be more stable with a slight increase in weight. Note the proklejku seams. They should be taped special termolentoj. Other ways to glue or to microcodes stitches after a short operation will be flowing and stretched on a seam.
ARC for tourist tents are made from steel, aluminium alloys of varying quality, fiberglass and epoxy resins.
Fiberglass-material based on fiberglass and epoxy resins. Relatively heavy and less durable (lifetime of up to 5 years), but has a number of advantages: no permanent deformation, high strength and elasticity, low price.